2000Watt DC motor Electric brush cutter without battery with all accessories (Battery to be carried as backpack)

Product description:

Rated voltage: 60V

Current:7-8A

Speed: 11000RPM

Idle time: 34 hours

Motor power: 1800W – 2000W

Battery capacity: 12A

Charging time: 7-8 hours for 24V battery

Actual consumption: about 2-3 hours

The series of environmentally friendly and energy-saving DC brush cutters produced by our company have the advantages of small size, light weight, low noise, easy operation, low maintenance costs, energy saving and environmental protection, low price and high quality, etc., and are suitable for shaping lawns and shrubs. Maintenance, not only the cut is smooth and beautiful, but also the operating efficiency is higher than the high energy consumption internal combustion gasoline brush cutter, and the efficiency is more than 10 times higher than manual brush cutting. It cannot only reduce noise, speed up progress, but also save labor costs. This machine is widely used in urban greening, community greening, highway isolation belts, parks, orchards, fields, forests, etc.

Required reading for use

1. Customers who have not purchased batteries from our company should pay attention to the positive and negative poles of the power supply;

Correct direction of blade rotation

pay attention:

Wrong connection of the positive and negative poles of the power supply may cause damage to the machine. (Determine whether the positive and negative poles are connected correctly according to the direction of blade rotation)

2. The machine voltage and battery voltage must correspond to avoid burning out the motor;

3. The machine shakes violently when it is working because the blade is not installed in the center position. When reinstalling the blade, it must not be installed offset;

4. Install the blade screw as a reverse screw, which is opposite to the usual direction of tightening the bottle cap;

5. Do not touch the stone when working to avoid shortening the blade life.

Safety rules

1. Only use the machine when the light is sufficient and the line of sight is clear. Pay attention to whether the ground is slippery and whether there is ice or snow (there is a risk of slipping). You must have a safe foothold. Do not work on an unstable location. Pay attention to your footing balance at all times.

2. Keep all parts of the body away from the cutting blade. Do not remove the cutting material or hold the material for cutting while the blade is in motion. Make sure the switch is open when clearing stuck material. Careless operation of the brush cutter can cause serious personal injury.

3. Start only when hands and feet are away from the cutting device.

4. All protective equipment and measures, as well as the protective equipment provided with the machine, must be used during work.

5. Do not stand on escalators or use them while moving quickly. Make sure both feet are on the ground.

6. Never climb into trees to work, and never bend into the woods to use this machine.

7. Do not work on unstable working surfaces.

8. Remove sand, stones, wires, nails and other peripheral objects within the working range. They may cause damage to the machine.

9. Always hold the machine properly with both hands during operation to ensure it is within your control.

10. If there are any problems during use, the power switch must be turned off immediately.

11. If you hit a stone or hard object while cutting brush, please turn off the machine immediately and check whether the cutter is damaged. Please replace damaged blades before working again.

12. To avoid the risk of tripping and loss of control, do not walk backwards while working.

13. Keep cables away from the cutting area. During operation, the cable may become hidden in bushes and may be suddenly cut by the blade.

14. Always disconnect the machine from the power supply when it is left unattended.

15. It is not allowed to wear damaged guards or guards, or to operate the appliance without guards or guards.

personal protective equipment

1. When working, you should wear appropriate, close-fitting clothing that will not hinder your work.

2. Please do not wear jewelry and loose clothes, as these clothes can easily get entangled in shrubs and hedges.

3. To avoid injuries to your eyes, hands and feet, and to protect your hearing, you must wear protective gear when using the machine.