Technical specs
GENERAL INFO
Level Essential
SKU 256060002/ST1
Series Series 1
EAN/UPC 8008984854895
POWER
Power source Electric
Power 0.6 kW
Motor type With brushes
Maximum motor speed 28000 rpm
CUTTING SYSTEM
Cutting length 55 cm
Blade length 60 cm
Blade type Dual action – Laser cut
Blade teeth speed 3200 spm
Teeth distance 20 mm
Cutting capacity (diameter) 20 mm
EQUIPMENT
VIBRATION AND NOISE DATA
Guaranteed sound power level (LwA) – dB(A) 98
Measured sound power level dB(A) 94.9
Measured sound pressure level at operator ear dB(A) 86
Vibration level rear handle (m/s2) 2.99
Vibration level front handle (m/s2) 2.99
OVERALL DIMENSIONS
Pack weight 4 kg
Product length 1038 mm
Product width 191 mm
Product height 187 mm
Product weight 3.25 kg
Support
WHICH TYPE OF VEGETATION CAN YOU WORK ON WITH THIS HEDGE TRIMMER?
This cordless hedge trimmer is an ideal tool for tackling medium-sized domestic bushes, including with those dense vegetation.
WHAT SHOULD I DO WHEN IT IS NOT BEING USED?
During the times when it is not being used, we recommend you clean the teeth of the cutting element and place the cordless hedge trimmer in a safe place, ensuring you protect the blade within the storage area.
DO THE CUTTING BLADES NEED MAINTENANCE OR SHARPENING?
Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the cordless hedge trimmer in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the cordless hedge trimmer in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
THE BLADES SEEM TO BE WORKING AS IF THEY ARE NOT CLEAN OR FLUID. WHAT MIGHT HAVE HAPPENED AND WHAT SHOULD I DO?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
Reviews
There are no reviews yet.