Outboard motor Parsun T3.6 CBM
Adaptation for Russian operating features
The model provides a check for an emergency stop of the engine.
All PARSUN outboard motors have a high-strength aluminum construction. The coating of the motor body is multi layer and is made with the most modern PPG paints and varnishes (USA), which provide high anti-corrosion properties and preserve the appearance of the product for a long time.
PARSUN engines have relatively low noise levels, especially at low revs. This is achieved through an installed muffler, which reduces high-frequency sounds. Your attention will be drawn to the pleasant and rolling growl of the PARSUN motor like a real beast.
PARSUN engines are equipped with vibration damping, even for low weight engines. You will not get tired of operating the outboard motor even after the engine has been running for a long time.
Availability of spare parts and consumables
The carburetor of the engine of PARSUN outboard motors is tuned to the properties of Russian fuel.
Impeller, manual starter are made of material with a large margin of safety.
Maneuverability and safety is ensured by the ability to control the throttle with a pivot grip.
Low noise level
The new design of the engine starter makes the engine easier to start.
Shifting front-neutral-rear is very simple.
The throttle lever, choke, starter, and engine stop switch are conveniently placed to create a confident start. Ease of control and maneuverability of the model is provided by a long steering handle, as well as the ability to adjust the force of rotation and the angle of trim of the motor.
This model is distinguished by a compact body, light weight. It is convenient to carry it due to the location of the handle on the motor housing. You can use this model in shallow water due to the provided engine lift adjustment.
Engine type – 2x – stroke
Number of cylinders – 1
Working volume, cubic cm. – 74.6
Bore x stroke, mm – 47.0×43.0 (1.85×1.69)
Maximum power, kW. (Hp) – 3.6
Idling speed, rpm – 1450-1550
Steering system – Tiller
Starting system – Manual starting
Ignition system – TCI
Fuel tank capacity, l. – 1.5
Maximum fuel consumption – 1.8
Transmission oil volume, cubic meters see – 100
Screw size, inch – 3-7.25 “x6” or 3-7.5 “x7”
Leg height, mm – 381
Overall height, mm – 1095/968
Overall length, mm – 397
Overall width, mm – 292
Weight, kg – 14.5